SMS Character Counter

Count the characters in a text message and see how many SMS it takes. The counter detects GSM-7 or Unicode encoding, shows which characters cut the limit from 160 to 70, splits long messages into parts of 153 or 67, and swaps smart quotes and dashes for plain ones in one click.

  • GSM-7 and Unicode
  • Shows every part
  • Stays on your device
0 characters
Stays on this device

How to count SMS characters

Check your SMS length with this SMS character counter in three steps.

  1. Paste your message

    The counter shows the characters, the encoding and how many SMS parts it takes.

  2. Check for Unicode characters

    If one curly quote, dash or emoji has switched the message to Unicode, it’s listed under the box. Press Replace smart quotes, dashes and spaces to swap the common ones for plain ones.

  3. Trim to fewer parts

    The ring shows how many characters are left before another part is needed; How your message is split shows each part.

Example

The sample reminder is 137 characters. Its one en dash (–) makes it Unicode, so it’s sent as 3 parts; replace the dash with a hyphen and it fits in 1 SMS.

Try this message

SMS character limits

An SMS carries 140 bytes. How many characters fit depends on the encoding:

EncodingOne SMSEach part of a longer messageUsed when
GSM-7160153Every character is in the GSM alphabet: A–Z, numbers, common punctuation and some accented letters
UCS-2 (Unicode)7067Any character is outside it: an emoji, a curly quote, a long dash, Chinese, Arabic, Hindi…

A long message is sent in parts, each carrying a small header that lets the phone join them back together, so a part holds 7 fewer GSM-7 characters or 3 fewer Unicode characters than a single SMS.

How many SMS parts a message takes

The most characters that fit in each number of parts:

PartsGSM-7 charactersUnicode characters
1up to 160up to 70
2161–30671–134
3307–459135–201
4460–612202–268
5613–765269–335
6766–918336–402
101,378–1,530604–670

A character is never split between two parts, so a message with characters that count as 2 can need one part more than the table shows.

Why one emoji makes your SMS cost more

GSM-7 packs each character into 7 bits, which is how 160 of them fit into a 140-byte SMS. It only covers 128 characters, though. If even one character in the message is outside that set, the whole message switches to UCS-2, which uses 2 bytes per character, and the limit drops to 70.

That’s why one emoji or one curly apostrophe can turn a 1-part message into 3 parts, and SMS providers bill by the part. Emoji take 2 characters in UCS-2, since they’re outside the range one UCS-2 character can hold.

The usual culprits come from word processors and phones that “smarten” text as you type: curly quotes (‘ ’ “ ”), long dashes (– —), the ellipsis (…) and non-breaking spaces. They look almost the same as plain ones, so the counter lists them, and the Replace button swaps them for their GSM-7 versions.

GSM-7 characters that count as 2

These characters are in GSM-7, so they don’t switch the message to Unicode, but each one takes 2 of the 160, because it’s sent with an escape character in front:

CharacterName
€Euro sign
[ ]Square brackets
{ }Curly brackets
\Backslash
^Caret
~Tilde
|Vertical bar

The form feed, a control character, also counts as 2.

Long messages and toll-free numbers

Phones join the parts back into one message, but each provider limits how long a message can be: Telnyx stops at 10 parts, Bird at 12, and Twilio at 1,600 GSM-7 or 700 Unicode characters. The counter warns you past 10 parts.

Messages sent from US and Canada toll-free numbers through Twilio fit one character less per part: 152 for GSM-7 and 66 for Unicode. Choose that under Sending from to count them correctly.

For chat apps, which don’t use SMS, see the Telegram character counter and the Discord character counter.

SMS character counter FAQ

What is the text message character limit?

One SMS holds 160 characters in GSM-7, the standard alphabet, or 70 if the message contains any character outside it, such as an emoji or a curly quote.

Why is my SMS limit 70 characters?

Your message contains at least one character that isn’t in the GSM alphabet, so the whole message is sent as Unicode (UCS-2), which fits 70 characters.

What is an SMS segment?

One part of a long message. Messages over 160 GSM-7 characters are sent in parts of up to 153, and Unicode messages over 70 in parts of up to 67. Providers bill per part.

Do spaces count in an SMS?

Yes. Spaces and line breaks count as 1 character each.

Do emoji count as 2 characters in an SMS?

Yes. An emoji switches the message to Unicode and takes 2 of its characters.

Which characters count as 2 in GSM-7?

The euro sign, square and curly brackets, backslash, caret, tilde and vertical bar, because each is sent with an escape character.

How do I keep my message in one SMS?

Stay within 160 characters and avoid emoji and smart punctuation. Press Replace to swap curly quotes, long dashes and odd spaces for plain ones.

What is the longest SMS I can send?

It depends on the provider. At 10 parts, the limit at Telnyx, that’s 1,530 GSM-7 or 670 Unicode characters; Twilio allows 1,600 GSM-7 characters.

Is my message uploaded?

No. It’s counted in your browser and nothing is sent or stored.